Design a friendship bracelet, see exactly how it will look, and get the knots for every row. Pick a chevron, diagonal stripes or an arrowhead, choose your colors, and this free friendship bracelet pattern generator shows the knot diagram, the order to lay out your strings and how long to cut each one for your wrist. Tap any knot to change it and make your own pattern, then download everything as a PDF.
Loading the bracelet pattern generator…
How to use the friendship bracelet pattern generator
- Choose a pattern. Chevron makes the classic V shape, Diagonal stripes makes the candy-stripe bracelet most people learn first, and Arrowhead makes an upside-down V. Stripes (left) runs the diagonal stripes the other way.
- Set the number of strings. Normal friendship bracelets use an even number of strings. Six to ten strings give the familiar width of about 1 to 2 cm.
- Pick the colors in the order you want to see them. The generator works out where each string has to start so the stripes appear in that order, and lists the strings from left to right. Every color is matched to a DMC embroidery floss number.
- Customize the knots. Tap a knot in the diagram to switch it between forward, backward, forward-backward and backward-forward. The bracelet preview updates instantly, and Undo takes you back a step.
- Cut your strings and download the PDF. The table shows how long to cut each string for your wrist size. The PDF has the preview, the string list, the full knot diagram and the knots for every row.
How to make a chevron friendship bracelet
The chevron is the most popular friendship bracelet pattern and a great second project after simple stripes. The colors are mirrored: with eight strings and four colors, the left half and the right half hold the same colors in reverse order. The generator shows the exact starting order for your colors.
- Tie the strings together with a knot, tape the knot down and lay the strings out in the order listed.
- Take the outermost left string and tie forward knots over each string until you reach the middle.
- Take the outermost right string and tie backward knots over each string until you reach the middle.
- Join the two middle strings with one forward knot. That completes one row of the V.
- Repeat with the new outermost strings. Each color makes one stripe of the chevron, and the colors repeat in the same order.
In the diagram, forward knots point down and to the right, and backward knots point down and to the left, so a chevron shows arrows meeting in the middle of every row.
How to make a diagonal stripe bracelet (for beginners)
Diagonal stripes are the easiest friendship bracelet pattern and the best place to start. Use four to six strings in different colors. Take the leftmost string and tie forward knots over every other string until it reaches the right edge. Then take the new leftmost string and do the same. Each pass makes one stripe, and the stripes run diagonally across the bracelet. Once the knots feel even, move on to the chevron.
The four friendship bracelet knots
- Forward knot (F, ↘). Make a “4” shape with the left string over the right string, pass it under and back through the loop, and pull it up tight. Do it twice. The left string moves one place to the right and its color shows on the knot.
- Backward knot (B, ↙). The mirror image: make a backward “4” with the right string over the left one, twice. The right string moves one place to the left.
- Forward-backward knot (FB, >). One forward half knot, then one backward half knot. The left string’s color shows, but the strings stay in place.
- Backward-forward knot (BF, <). One backward half knot, then one forward half knot. The right string’s color shows and the strings stay in place.
Forward-backward and backward-forward knots let a color stay on the same side of the bracelet, which is how diamonds, hearts and more complex designs are made. Tap knots in the diagram to try them.
How long to cut string for a friendship bracelet
A good starting point is about 90 cm (35 inches) per string for a 6.5-inch wrist, when you do not fold the strings in half. That leaves enough for the knotted part and for braided ties at both ends. Strings that tie more knots use more thread, so the generator counts the knots each string ties in your pattern and gives it more length: a string that ties half as many knots as average needs only about three quarters of the length.
- For a larger or smaller wrist, the lengths scale automatically when you change the wrist size.
- If you fold strings in half and start with a loop, cut each string twice as long and count it as two strings.
- Wider bracelets do not need longer strings in a chevron or diagonal pattern, but strings that keep the same color on one side (with FB and BF knots) can run out first. Add 10 to 15 cm if you knot loosely.
How to read a friendship bracelet pattern
The strings start at the top of the diagram in the order you lay them out. Row 1 knots strings 1 and 2, 3 and 4, and so on; row 2 knots strings 2 and 3, 4 and 5, and so on, so the knots sit like bricks. Each circle is one knot, its color is the color that shows on the bracelet, and the arrow tells you which knot to tie. The diagram shows one full repeat: when you reach the bottom, start again at row 1 with the strings in the same order. The written rows list the same knots as letters, for example “F, F, F, B, B, B”.
Normal patterns or alpha patterns?
Normal patterns like these are made of diagonal knots, which makes stripes, chevrons, diamonds and zigzags. If you want to spell a name or make a pixel-style picture, use the alpha pattern generator instead: in alpha bracelets every knot can be any color. To pick floss colors, compare shades or keep a shopping list, use the DMC color chart, and to match a color from a photo, the DMC color converter.
Frequently asked questions
How many strings do I need for a chevron bracelet?
Chevrons need an even number of strings, usually 8, 10 or 12. With 8 strings you can use up to 4 colors, each mirrored on both sides.
How long should I cut the strings?
About 90 cm (35 inches) each for a 6.5-inch wrist, a little more for strings that tie more knots. The generator calculates the length of each string for your pattern and wrist.
What is the easiest friendship bracelet pattern for beginners?
Diagonal stripes with four to six strings. It uses only forward knots, so you learn one knot and keep your tension even before trying a chevron.
How do I read the arrows in a friendship bracelet pattern?
An arrow pointing down and right is a forward knot, down and left is a backward knot, and the bent arrows (> and <) are forward-backward and backward-forward knots.
Can I design my own friendship bracelet pattern?
Yes. Start from any pattern, then tap knots to change them and pick your own colors. The preview and the string lengths update as you go, and you can download your design as a PDF.
Is the friendship bracelet pattern generator free?
Yes. It is free, needs no account and works on phones, tablets and computers.