Make a corner-to-corner (C2C) crochet graph from a photo or draw one tile by tile. The generator counts the tiles in every color, estimates the yarn you need, works out the finished size from your tile gauge and writes the diagonal row-by-row instructions for you. Free, no sign-up, with PNG and PDF downloads.
A 40 × 40 C2C graph has 1,600 tiles and 79 diagonal rows. In worsted weight, at about 5 tiles per 4 in (tiles of roughly 0.80 in), it comes out about 32.0 × 32.0 in (81.3 × 81.3 cm).
Written row-by-row instructions
Each square is one C2C tile (chain 3 and 3 double crochet). Row 1 is the bottom-right square and every row is one diagonal: odd rows are listed from the bottom-left end to the top-right end and even rows the other way. Default tile sizes are typical for each weight; measure a few tiles of your own and enter them for an exact finished size. Yarn amounts use the typical yardage per square inch of crocheted fabric plus the margin you set. Your design is saved in this browser only; photos are processed on your device and never uploaded.
How to make a C2C graph
- Set the size in tiles. Enter how many tiles across and how many tiles up. A baby blanket is often around 40 × 45 tiles in worsted weight; a throw around 60 × 75.
- Enter your tile size. Choosing a yarn weight fills in a typical tile gauge. For an exact finished size, crochet a small swatch, measure a few tiles and enter how many fit in 4 in (10 cm).
- Pick colors and draw, or tap Photo to graph to convert a picture into 2 to 8 colors.
- Open the written instructions to get every diagonal row as color runs, such as 4 A, 2 B, 7 A.
- Download the graph as a PNG, or use Print / save as PDF for the graph, color key, tile counts, yarn amounts and instructions in one document.
Your graph is saved in this browser automatically, so you can come back to it later.
What is C2C crochet?
Corner to corner is a technique where the fabric is built from small tiles worked on the diagonal. The classic tile is a chain 3 and three double crochet. You start with a single tile in one corner, add one tile to every diagonal row until the piece is as wide and as tall as you want, then decrease back down to the opposite corner. Because each tile is one square on the graph, C2C is a popular way to crochet pictures, lettering and pixel art blankets.
If you prefer working a picture in straight rows of single crochet, use the crochet graph maker instead: the squares are smaller, so you get more detail for the same size.
How to read a C2C graph
Row 1 is the single tile in the bottom-right corner. Every row after that is one diagonal line of tiles across the graph. In the written instructions, odd rows (marked ↗) are listed from the bottom-left end of the diagonal to the top-right end, and even rows (↙) from the top-right end down, so each row starts where you are after turning.
The instructions also tell you when to change from increasing to decreasing:
- Square graphs: increase at both ends until the longest diagonal, then decrease at both ends.
- Rectangles: increase at both ends until you reach the shorter side. Then keep increasing at one edge and decrease at the other, so every row has the same number of tiles, until you reach the longer side. Finally decrease at both ends to the last corner.
A graph that is W tiles wide and H tiles high always has W + H − 1 diagonal rows. A 40 × 40 graph, for example, has 79 rows and 1,600 tiles.
C2C tile size and finished blanket size
Tile size depends on yarn, hook and tension, which is why the generator lets you enter your own. As a starting point it uses about 5 tiles per 4 in for worsted (tiles of roughly 0.8 in), 7 for DK and 3.75 for bulky. At 5 tiles per 4 in:
- a 30 × 36 in baby blanket is about 38 × 45 tiles (1,710 tiles, 82 rows);
- a 50 × 60 in throw is about 63 × 75 tiles (4,725 tiles, 137 rows).
Mini C2C, made with smaller tiles of half double crochet or single crochet, works the same way: measure your tiles and enter the gauge, and the size and yarn estimates follow.
How much yarn for a C2C blanket?
The color table counts tiles and turns them into yards or meters and grams, using the typical yardage of crocheted fabric per square inch in each weight from published blanket patterns, scaled to your tile size, plus the margin you choose. Each color change adds ends and joins, so keep at least a 10% margin. To check the overall total for a standard blanket size, try the how much yarn calculator, and see the yarn weight chart if you are unsure which weight your yarn is.
Tips for color changes in C2C
- Wind a separate bobbin for every block of color in a row instead of carrying yarn across long distances.
- Change color on the last yarn over of the tile before the new color so the edges stay sharp.
- Weave in ends every few rows; on a picture blanket they add up quickly.
- Simplify the photo: fewer colors and fewer single isolated tiles make the blanket much faster to crochet.
Frequently asked questions
Is this C2C graph generator free?
Yes. Drawing, photo conversion, written instructions and the PNG and PDF downloads are all free and need no account.
Can I start from the bottom-left corner instead?
Yes. Mirror your picture before importing it, or simply work the instructions as written, starting from the bottom-left: the result will be a mirror image of the graph, which only matters for lettering.
How many colors can a C2C graph have?
Up to 12 colors when drawing and up to 8 when converting a photo. Most C2C pictures look best with 3 to 6.
Does it work on a phone or tablet?
Yes. Use Draw and Fill to color tiles, Scroll to move around and the + and − buttons to zoom.
Are my photos uploaded?
No. Photos are converted inside your browser and never leave your device, and your graph is stored only in your browser.